← Back to Advice
Advice · 17 November 2026

Forklift LOLER Inspections: What You Need to Know

Forklift LOLER Inspections: Everything You Need to Know

If you own or operate a forklift, keeping it safe and compliant is essential. But what exactly is a LOLER inspection, how often does your forklift need one, and what should you look for when buying a used machine?

At AMTEC Materials Handling, we believe buying a used forklift should be straightforward. Understanding LOLER is an important part of making an informed purchase.

Here’s what you need to know.

What is LOLER?

LOLER stands for the Lifting Operations and Lifting Equipment Regulations 1998.

These UK regulations place legal duties on businesses that own, operate or control lifting equipment, including forklifts used at work.

Their purpose is to help ensure lifting equipment is suitable for its intended use, properly maintained and operated safely.

One key requirement is that lifting equipment undergoes a regular thorough examination by a competent person.

You may hear this described as a LOLER test, LOLER inspection or forklift certification, although thorough examination is the correct regulatory term.

Do forklifts need LOLER inspections?

Yes. Forklifts used to lift and lower loads at work are subject to LOLER requirements.

This applies to common types of industrial lift trucks, including:

  • Electric counterbalance forklifts
  • Diesel and LPG forklifts
  • Reach trucks
  • Other lift trucks with lifting equipment covered by LOLER

The requirements apply whether the equipment is new or used.

Importantly, LOLER is not the only regulation to consider. The Provision and Use of Work Equipment Regulations 1998 (PUWER) also cover the safety, maintenance and inspection of work equipment.

For a forklift, this means both its lifting components and other safety-critical systems need appropriate attention.

How often does a forklift need a LOLER inspection?

For most forklifts used to lift goods, a thorough examination is required at least every 12 months, unless a written examination scheme prepared by a competent person specifies different intervals.

However, some circumstances require more frequent examinations.

Equipment or applicationNormal examination interval
Standard forklift lifting goodsEvery 12 months
Forklift used to lift peopleEvery 6 months
Lifting accessoriesEvery 6 months
Equipment under a written examination schemeAs specified by the competent person

Additional examinations may also be necessary following significant damage, certain repairs, modifications or other exceptional circumstances affecting equipment safety.

It’s important to check the examination report rather than simply assuming every forklift has a 12-month interval.

What is checked during a forklift LOLER examination?

A thorough examination assesses the condition of the lifting equipment and components that could affect safe operation.

Depending on the forklift, the examination may include:

Forks and carriage

Checking for damage, cracking, distortion and excessive wear.

Mast and lifting mechanisms

Examining the mast structure, moving components and associated lifting mechanisms.

Lifting chains

Checking chain condition, wear, adjustment and signs of deterioration.

Hydraulic lifting components

Assessing relevant cylinders, connections and components for defects that could affect lifting safety.

Attachments and load-handling equipment

Examining applicable attachments and their suitability and condition.

The exact scope is determined by the competent person carrying out the examination.

Other safety-related components, such as brakes, steering and tyres, require appropriate inspection under PUWER. A comprehensive lift-truck examination programme may address both sets of requirements.

Is a LOLER examination the same as a forklift service?

No — and this is an important distinction.

A forklift service primarily focuses on maintaining the equipment, identifying wear, and carrying out necessary maintenance or repairs.

A LOLER thorough examination is a formal assessment of the safety of the lifting equipment, carried out by a competent person who must be sufficiently independent and impartial.

A forklift can be regularly serviced and still require a thorough examination.

Equally, a current LOLER report does not mean the machine no longer needs routine maintenance, operator checks or other safety inspections.

Both are important parts of keeping a forklift safe and operational.

What happens if a forklift fails its LOLER examination?

If an examination identifies a defect that presents an immediate or imminent risk of serious injury, the equipment must not continue to be used until the danger has been addressed.

Other defects may be given a specified period for corrective action, depending on their severity.

The competent person records relevant findings in a written report, including any necessary actions and the date of the next examination.

This is why a thorough examination is more than a paperwork exercise. It helps identify potential problems before they lead to serious incidents.

Why does LOLER matter when buying a used forklift?

When purchasing a used forklift, appearance and operating hours only tell part of the story.

A clean machine with relatively low hours isn’t automatically a safe or suitable purchase.

Before buying, it’s worth asking:

  • Does the forklift have a current report of a thorough examination?
  • When is its next examination due?
  • Were any defects identified, and have they been rectified?
  • Has the machine been properly maintained?
  • Is the forklift suitable for the loads and working environment you have in mind?

A current thorough examination report provides valuable information about the lifting equipment at the time of the examination.

However, it should always be considered alongside the machine’s overall condition, maintenance history and suitability for the intended application.

The AMTEC Advantage: Used forklifts with confidence

At AMTEC Materials Handling, we understand that buying used machinery is about more than finding the right price.

You need equipment you can depend on, supported by people who understand what they’re selling.

That’s why our AMTEC Advantage package is designed around five key benefits:

1. LOLER Examined

Our used forklifts undergo LOLER thorough examinations, with the relevant documentation available.

2. Workshop Checked

Machines are inspected and tested as part of our preparation process.

3. Personalised Machine Video

Want to see a forklift before travelling to view it? We can provide a personalised video to help you assess the machine.

4. 30-Day Guarantee

Our used forklift advantage package includes a 30-day guarantee, subject to the applicable terms.

5. Machine Handover

We help you understand your machine so you can get straight to work.

It’s all part of our commitment to making used forklift purchasing more straightforward.

Looking for a used forklift?

Whether you’re replacing an existing machine, expanding your fleet or purchasing your first forklift, choosing the right equipment matters.

At AMTEC Materials Handling, we supply a range of used electric, diesel and specialist materials handling equipment to businesses throughout the UK.

Our team can help you understand your options and find a machine that suits your requirements.

Browse our available used forklifts or contact the AMTEC Materials Handling team.

Keeping your business moving.